Water Test Kit Chlor*Test W


Water Test Kit CHLOR*TEST W

Chloride Ion Test Kit for Water/Liquids

Did your wash water contaminated with chlorides?

Many coatings have failed from chlorides deposited on a surface by contaminated water, finally there is a test that you can do in the field in minutes! No more sending samples to a laboratory require, that not only safe your time but also safe your cost!

Chlor test W Water Test Kit

Chlor*Test-W- Kit


Water Test Kit CHLOR*TEST W is a complete test kit and also simple to use, even an inexperienced person can accurately measure chloride levels.

CHLOR*TEST “W” developed for field and also laboratory use.

  • Through one time use individual components surely eliminated the cross contamination from test to test.
  • The accurate results in parts per million are obtained.
  • No temperature correction require for temperature from 41°F to 176°F.
  • Testers around the world will use this innovative product with confidence.

Whether in the laboratory or out at the job-site, to obtain accurate ion specific measurement of chlorides from 0 – 2,000 ppm, use CHLOR*TEST “W” for water and many other liquids. Water-soluble chloride, if present in sufficient amount, is capable of initiating or accelerating the corrosion of some metallic materials embedded in or contacting cementitious mixtures such as mortar and concrete. Chloride content, along with other factors, can be indicators for the possibility of corrosion of embedded metallic materials. This test method is used to determine the water-soluble chloride content in cementitious mixtures, either in new construction or existing structures.

Most of the Potable Water are contain Chloride.

When specifications require safe and reliable testing for chloride contamination use CHLOR*TEST “W”. Each kit contains everything needed to perform five (5) individual tests.

Water test usually use for Pressure Washing, UHP Water Jetting and also Wet Abrasive Blasting .

Should you require more detail product or inquiry please contact us.


Chlor Rid

Who is Chlor Rid

CHLOR RID are manufactures surface decontamination and also passive products. Along with a full line of salt testing kits, and also provides the technical support to maximize their effectiveness. Surface Cleanliness is ESSENTIAL to Coating Performance. That why Chlor Ride provide a time use of test kit such as abrasive, water, CSN, and also Chlotest Kit.

Chlor Rid Measuring Surface Salts – Conductivity vs Ion Specific.

Testing and identifying residual surface salts is an integral part of proper surface preparation. Their removal is pivotal to the long-term performance of industrial coatings. Consequential risk reduction translates to lower life-cycle costs. Two commercial field methods are discusses to provide the user guidance on the method most suit to identifying the presence of salts where salt contamination is suspect.

Monetizing the Risk of Coating Failure.

Coatings can fail because of soluble salt contamination remaining on the substrate after surface preparation. This article discusses methods of salt removal and the importance of good surface preparation specifications. A case history reveals the possible costs of a coating failure from salt contamination.

Pipe Line Corrosion Protection.

Corrosion protection by coatings for water and wastewater pipelines is the implementation of a well-balance cycle of four equally important elements. Specifying and using a proper coating system. Proper surface preparation for the coating system, proper application of the coating system, and also quality inspection of the coating system. This paper discusses the details of this concept, together with a comprehensive review on various coating systems. And different surface preparation requirements for steel, ductile iron, and concrete pipes in water and wastewater applications. PT. Cuanli Perkasa Jaya is one of Chlor Rid worldwide distributors in Indonesia.