CSN Test Kit

Description

Chloride/Sulfate/Nitrate Ion CSN Tests Kit for Surfaces

CSN Test Kit from CHLOR*TEST is the most specifications do not address sulfates or nitrates, because there has never been a sulfate or nitrate field test kit before, and Now, there is available a complete test kit that can tests all three salts.

 

CSN Test Kit
Chlor*Test CSN Complete Kit

CSN Test Kit CHLOR*TEST Offers the specifier to the availability of trouble-free performance testings in the field, for chlorides, sulfates, and also nitrates with one extraction.                          The CHLOR*TEST “CSN Salts” uses an unique patented extract solution called, CHLOR*EXTRACTº, to retrieve surface salt contamination. This special extract enhances retrieval rates, thereby surely will increasing accuracy. The greater the retrieval rate surely will get more accurate the test results. Surface sampling is simplified by use of the patented CHLOR*SLEEVE. The test sampling not only can be done on overhead, vertically, but also horizontally or any angle with this device.

With only one time use components surely will eliminated Cross contamination from test to test

No conversion chart required since all the test results are measured directly in parts per million.

Parts per million readings are a 1 to 1 ratio to micrograms per square centimeter, therefore no mathematical calculations are necessary.

 

According to ASTM D5081-21 described the Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Suppressed Ion Chromatography.

A New Generation of Chloride Sulfate Nitrate Test Kit

EPA compliant – No need to select a low or high range because Meters range is 0-100ppm with auto ZEROING.

Digital direct readings – with a large 3-1/2 digital display incorporating low-battery warning.

European CE Mark of compliance for electromagnetic compatibility and also safety.

Just in minutes count to achieved quantitative. Each kit contains (5) individual tests with new refill kits available.

CHLOR*TEST® “CSN” SALTS kit is the most recommended for surface testing field likes:

Mining facilities, Ships, Marine structures, Storage tanks, Cooling towers, Pipe lines, Power plants, Offshore rigs, Petrochemical plants, Pulp and paper mills, Steel fabrication, and also Electronics.

CHLOR-TEST Kit.

The revolutionary new method for testing salt contamination is the most accurate field test on the market today.

For more product detail, accessories, or other related product and also inquiry please do not hesitate contact us.

Brand

Chlor Rid

Who is Chlor Rid

CHLOR RID are manufactures surface decontamination and also passive products. Along with a full line of salt testing kits, and also provides the technical support to maximize their effectiveness. Surface Cleanliness is ESSENTIAL to Coating Performance. That why Chlor Ride provide a time use of test kit such as abrasive, water, CSN, and also Chlotest Kit.

Chlor Rid Measuring Surface Salts – Conductivity vs Ion Specific.

Testing and identifying residual surface salts is an integral part of proper surface preparation. Their removal is pivotal to the long-term performance of industrial coatings. Consequential risk reduction translates to lower life-cycle costs. Two commercial field methods are discusses to provide the user guidance on the method most suit to identifying the presence of salts where salt contamination is suspect.

Monetizing the Risk of Coating Failure.

Coatings can fail because of soluble salt contamination remaining on the substrate after surface preparation. This article discusses methods of salt removal and the importance of good surface preparation specifications. A case history reveals the possible costs of a coating failure from salt contamination.

Pipe Line Corrosion Protection.

Corrosion protection by coatings for water and wastewater pipelines is the implementation of a well-balance cycle of four equally important elements. Specifying and using a proper coating system. Proper surface preparation for the coating system, proper application of the coating system, and also quality inspection of the coating system. This paper discusses the details of this concept, together with a comprehensive review on various coating systems. And different surface preparation requirements for steel, ductile iron, and concrete pipes in water and wastewater applications. PT. Cuanli Perkasa Jaya is one of Chlor Rid worldwide distributors in Indonesia.