PT. CUANLI PERKASA JAYA
YOUR COATING INSPECTION INSTRUMENT AND TESTING TOOL SOLUTION

Cross Cut Adhesion Test

Category:
TQC Sheen brand

Description

What is CROSS CUT ADHESION TEST ?

Cross cut adhesion test methods cover procedures for assessing the adhesion of coating films to metallic substrates by applying and also removing pressure-sensitive tape over cuts made in the film. In order to perform this procedure, one ought to have the required tools: the crosscut kit, magnifier and a table chart. The kit consists of parallel knives used to cut through the dry paint.

The first test requires to make a lattice pattern in the film to the substrate by producing a series of parallel cuts, and then cross-angled to each other to produce 25–100 squares of the same dimensions. The second, short treatment is done on the ruled area by brushing in a diagonal direction; pressure-sensitive tapes can also be used for hard substrates. Finally, the grid area is examine and evaluated by a magnifier and also the standard table chart to determine the adhesion rate of the coating or paint.

The coating removal is specially use to determine the rate of adhesion. The variance of the adhesion of coatings comes as a result of the surface treatment or the nature of the substrate. A crosscut adhesion test is done on different substrates provided there exists a film of coating.

Firstly is TQC CROSS CUT ADHESION TEST KIT CC1000

The TQC Cross Cut Adhesion Test KIT CC1000 is a destructive method use to test the adhesion of dry coats of paint on their substrate. With two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. Then the ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The round cutting knife of the TQC CC1000 Kit has eight cutting edges, that can be changes easily only by rotating the knife. The self positioning knife bracket will ensures equal pressure on the cutting knife.

Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and also a roll of adhesive tape acc. EN ISO 2409.

TQC Cross Cur Adhesion Tester 1000 Cross Cut Adhesion Tester CC1000

 

Secondly is TQC Cross Cut Adhesion Test KIT CC2000

TQC CC2000 Test KIT is use to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating.

Two series of parallel cuts cross angle to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluable by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

Because the cutting knife is very easy to exchange, and user friendly that why there is no use of extra tools. The self positioning knife bracket will ensures equal pressure on the cutting knife.

Each KIT CC2000 contains a grip with cutter, a brush, an illuminated loupe and also a roll of adhesive tape acc. ISO 2409.

TQC CC 2000 Cross Cut Adhesion Tester CC 2000 CC 2000 kit

Application area’s : Coating/Paint Industry, Galvanise, Automotive, Laboratory, Painters, Shipping Industry, Steel Protection, and also Wood.

Features                       ·

  • Self-adjusting knife-holder for ensures equal pressure on the cutting knife
  • Ergonomically shaped handle
  • Easy to change cutting knife, so no extra key needed
  • Wide range of knife sizes available for different coating thicknesses substrates and also according to different

Standard delivery Cross of Cut Adhesion Tester acc. to DIN-ISO, 6 teeth

SP1690 TQC CCA test kit CC2000, incl. blade 1mm

SP1691 TQC CCA test kit CC2000, incl. blade 2 mm

SP1692 TQC CCA test kit CC2000, incl. blade 3 mm.

Standard Delivery of Cross cut Adhesion Tester acc. To ASTM, 11 teeth

SP1699           TQC CCA test kit CC2000, include blade 1 mm.

SP1700           TQC CCA test kit CC2000, incl. blade 1,5 mm.

The test kit contains a soft grip handle, a hardened steel cutter (type may vary, see above), a nylon.

Available optional spare knife of CCA Test Kit according to your job requirement.

Finally is TQC CC3000 TEST KIT

Through its extensive adjustment possibilities, this version is ideal if the test is perform by constantly changing persons.

TQC CC3000 Cross Cut Adhesion Test Kit CC3000

The CC3000 test kit is use to test the adhesion of dry coats of paint on their substrate. By means of a series of cuts through the coating. Come with two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluable by using a table chart. After a short treatment with a stiff brush, or adhesive tape for hard substrates.

FEATURES
1. Firstly The blade holder is kept at a set distance from the surface, with the aid of two wheels (ball bearings) to ensure reproducible test results guaranteed. The depth of the TQC CC3000 kit is adjustable to measure coatings from 25 until 250 µm thick
2. Secondly Ergonomically shaped handle
3. Than Easy to change cutting knife
4. Finally Wide range of knife sizes available for different coating thicknesses and substrates and according to different standards.
Each TQC Cross Cut Adhesion Test KIT CC3000 contains a grip with cutter, a brush, an illuminated loupe and a also roll of adhesive tape acc. EN ISO 2409.

MASTER PAINT PLATE

Versatile measuring tool with common tests for paints and coatings. TQC Master Paint Plate is a stainless steel measuring tool, that features : a 1, 1.5, 2 and also 3 mm. The cross-cut-adhesion-test according NEN-EN-ISO 2409:2003 and also ASTM D 3359 (X-cut) Andreas cross.

Master Paint Plate TQC X Cut Master Paint Plate

Additional tools

  • Wet film thickness gauge ranging from 50 microns until 160 microns.
  • On the corners there is an edge grind checker for correct roundness of edges.
  • At the bottom is a wet film applicator ranging from 0 until 180 µm.
  • The top edge provides a leveling test, an indication of the viscosity of the coating.
  • Delivery includes cutting tool and also tape.

The TQC adhesion test tape is manufacture according to ISO 2409:2003 and ISO 2409:1999, can be orders separately as well.

This product manufactured according to standards NEN-EN-ISO-2409, ASTM D3359

For more detail and related products information please contact us.

Brand

TQC Sheen

What is TQC Sheen

TQC Sheen brand TQC Sheen name has been recognize as a leader in innovative paint test equipment since 1947. And as part of Industrial Physics – a global packaging, product, and material test and inspection partner – we’re able to protect the integrity of manufacturers, production lines, and laboratories across a multitude of industries all over the world. We can help you to understand anything you need to know about your inks and coatings testing process. Our brand is known for innovative paint test equipment. TQC Sheen offers a wide variety of products. Including a range of wash ability testers, appearance meters, coating thickness gauges, automatic film applicators and also bresle patches. All products are design to meet the highest quality standards. Across our organization, we provide you with all kinds of coating test devices. From washability testers, appearance meters, and coating thickness gauges – through to automatic film applicators and bresle patches. Our solutions are relied upon by R&D laboratories and paint manufacturers alike – so you can breathe easy with TQC Sheen test equipment. Our viscosity measurement instruments are uses in laboratories and production facilities all over the world. And our instruments adhere to a variety of international testing standards.

QUALITY

In  our brand line of business where quality is the keyword for our customers. We decide to have our organisations certify according the ISO 9001 standards by “Det Norske Veritas”. High quality products are supply and also maintain by our efficient organisation following well-structure procedures. And also always keeping the customers wishes in the first place! As part of Industrial Physics – a global packaging, product, material test and also inspection partner. We’re able to protect the integrity of manufacturers, production lines, and also laboratories across a multitude of industries all over the world. We can help you to understand anything you need to know about your paints and also surface coatings. The TQC Sheen name has been recognize as a leader in innovative paint test equipment since 1947. We make all kinds of testing devices. From wash-ability testers, appearance meters and coating thickness gauges – through to automatic film applicators and bresle patches. PT. Cuanli Perkasa Jaya is one of TQC Sheen worldwide distributors location in Indonesia
TQC Sheen brand