TQC Concrete Moisture Meter

Categories: ,

Description

Concrete Moisture Meter

TQC Concrete moisture meter is a non-destructive moisture meter for concrete. With a simple pressing the instrument against the concrete surface the moisture content of concrete can be easily determined .

The electrical impedance is measured through generating a low frequency electric field between 8 electrodes at the bottom of the instrument. Depending on the moisture content the measurements are made to a depth of several centimeters.

This system is not suitable to measure through electrically conductive materials like metal or rubber linings or wet surfaces.

TQC Concrete Moisture meters are ideal to quickly test large concrete floors, to be painted construction, or (wooden) flooring are being installed.

Meter On Surface

Concrete Moisture Meter

Moisture Meter Feature

Four moisture scales

Four scales allow flexible use of the instrument as an accurate measuring device or just as a detector to find moisture traces or leakage.

  1. Concrete 0-6% H2O

    Concrete scale only used for concrete surfaces. It shows the relation between weight of pure water contained in the tested material with its dry weight. The scale range varies between 0 and 6% as 6% is about maximal physically possible content of water in the concrete.

    The obtained results should not influence by moisture emission or any other humidity measurement methods.

  2. ~ Carbide Method 0-4% H2O

    Carbide scale shows concrete humidity according to the carbide method.

  3. Relative Scale 0-100%

    Relative scale formally used in humidity level comparison of various materials. The Obtained results should not be interpreted as percentage content of water in tested surfaces. There is no linear correlation between the outcomes and relative humidity. The scale only use as comparison technique. Scale may be used on the surfaces where direct contact with pure concrete is impossible because of some layer/covering.

  4. ~ 15. Scale 0.3-15.3m

    15 Scale works in a similar way as the Relative scale and can be used alongside meters with the same scale, which ranges between 0.3 and 15.3.

With the convenient features such as a “max-hold” use for hard reaches places and “auto-switch off” are integrated.

Specifications

  • Dimensions: 147x89x33mm
  • Power supply: 2xAA battery
  • Average working time on one battery set : 20 hours
  • Display: monochrome 128×64 pixels, size 61x33mm with backlight
  • Operating temperature range: 5°C to 40°C
  • Accuracy: ±0.5%

Scope of supply

  • Concrete moisture meter
  • Soft pouch
  • Manual

Brand

TQC