Description
PosiTector 6000 Coating Thickness Gages for ALL Metal Substrates
Positector 6000 coating thickness gages is rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly
- Ready to measure without calibration adjustment required for most applications
- Solvent, acid, oil, water, and dust resistant – weatherproof too
- Wear resistant ruby probe tip instead for long-lasting calibration
- PosiTector interchangeable platform – attach any PosiTector probe to a single gage body, and available probe reading to 63.5mm
- USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
- Certificate of Calibration showing traceability to NIST or PTB included (Long Form)
Available selection PosiTector 6000 Coating Thickness Gages – Probes
Select from a variety of measurement ranges and probe styles
Cabled Regular Probes
FS, NS, FNS, NAS, FTS

Positector 6000 Coating Thickness with Cabled Probes
FXS Xtreme™
Uniquely designed for rugged applications. The FXS Xtreme™ probe with zirconia-toughened alumina wear face is ideal for rough steel surfaces.
Enhanced measuring speed of 50+ readings per minute makes it ideal for measuring large, rough surfaces quickly. Scan mode increases measurement rate to over 100 readings per minute (PosiTector Advanced only).
Compatible with PosiTector bodies with serial numbers greater than 700,000.

Positector 6000 coating thickness gages Extreme probes
Cabled 90° Regular Probes

FRS, NRS, FNRS
Right angle probe for measuring within areas of low headroom.
With the constant-pressure will totally hermetically sealed stainless steel probes to be waterproof and this ideal for underwater use.
Cabled FNDS Probe for Duplex Coatings
The PosiTector 6000 FNDS probe measures the individual thicknesses of both the paint and the zinc layers in a duplex coating system with a single reading.
Duplex coating systems use a combination of both two corrosion protection systems – typically paint or powder coating over galvanized steel (hot-dip, electro or zinc spray metallizing). The resultant corrosion protection is superior to either protection system used independently.
In Duplex mode, the PosiTector 6000 FNDS utilizes both magnetic (ferrous) and eddy current (non-ferrous) principles simultaneously to calculate and display the individual paint and zinc layer thicknesses. The magnetic principle is used to measure the combined paint/zinc thickness over the ferrous substrate, and the other, eddy current principle is used to measure the paint thickness over the non-ferrous zinc coating. The zinc thickness is calculated by subtracting the paint thickness from the combined paint/zinc thickness measurement.
Cabled 0° Microprobes

F0S, N0S
With our smallest measuring tip and best thin-film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges.
The straight F0S and N0S Microprobes have a quick release adapter that makes them constant pressure probes for alignment on small, flat or curved parts. This adapter is held in place by a spring, if the sleeve is not required, just simply pull it off the probe.
Cabled 45° Microprobes

F45S, N45S
High-Range Probes

Positector 6000 Coating Thickness Gages High range probes